Lowest Component Count, Energy Efficient Off-Line Switcher IC
Product Highlights
· Cost Effective Linear/Cap Dropper Replacement
· Lowest cost and component count buck converter solution
· Fully integrated auto-restart for short-circuit and open loop fault protection - saves external component costs
· 66 kHz operation with accurate current limit - allows low cost off-the-shelf 1mH inductor for up to 120mA output current
· Tight tolerances and negligible temperature variation
· High breakdown voltage of 700 V provides excellent input surge withstand
· Frequency jittering dramatically reduces EMI (~10 dB) - minimizes EMI filter cost
· High thermal shutdown temperature (+135°C minimum)
Much Higher Performance over Discrete Buck and Passive Solutions
· Supports buck, buck-boost and flyback topologies
· System level thermal overload, output short-circuit and open control loop protection
· Excellent line and load regulation even with typical configuration
· High bandwidth provides fast turn-on with no overshoot
· Current limit operation rejects line ripple
· Universal input voltage range (85 VAC to 265 VAC)
· Built-in current limit and hysteretic thermal protection
· Higher efficiency than passive solutions
· Higher power factor than capacitor-fed solutions
· Entirely manufacturable in SMD
EcoSmart® – Extremely Energy Efficient
· Consumes typically only 50/80mW in self-powered buck topology at 115/230 VAC input with no load (opto feedback)
· Consumes typically only 7/12mW in flyback topology with external bias at 115/230 VAC input with no load
· Meets Blue Angel, Energy Star, and EU requirements
Applications
Appliances and timers
LED drivers and industrial controls
Description
LinkSwitch-TNis specifically designed to replace all linear and capacitor-fed (cap dropper) non-isolated power supplies in the under 360mA output current range at equal system cost while offering much higher performance and energy efficiency.
LinkSwitch-TN devices integrate a 700 V power MOSFET, oscillator, simple On/Off control scheme, a high voltage switched current source, frequency jittering, cycle-by-cycle current limit and thermal shutdown circuitry onto a monolithic IC. The start-up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias supply an associated circuitry in buck or flyback converters. The fully integrated auto-restart circuit safely limits output power during fault conditions such as short-circuit or open loop, reducing component count and system-level load protection cost. A local supply provided by the IC allows use of a non-safety graded optocoupler acting as a level shifter to further enhance line and load regulation performance in buck and buck-boost converters, if required
Τιμή: 3.80 €
Web Design by: Olon Systems